Click on the image for an enlarged view
This meter has been designed to measure both surface resistance and resistance to ground. To measure surface material place the meter on the area to be tested and press the test button. For measuring resistance to ground, place the ground lead into the earth leakage socket, connect the crocodile clip to the area to be tested and press the test button.
The meter will test conductive, static dissipative and insulative surfaces using two parallel bars set to give ohms per square readings. Conductive is indicated by green LEDs from 10^3-10^5, static dissipative by yellow LEDs from 10^6-10^11 and insulative by red LEDs 10^12+.
The battery power is ok whilst the yellow LED is on - when it starts to go dim this indicates that the battery should be changed.
Decade changeover :
Resolution :
Accuracy :
Temperature :
Power :
Test voltage :
Weight :
Dimensions :
+/- ½ decade on a logarithmic scale
1 decade
+/- ½ decade
4°C-55°C
9 volt PP3 alkaline battery
Nominal 9 volt
182 grams
128x63x25 mm
Calibration should be carried out biannually.
The meter comes complete with ground lead, battery and carrying case.
Close window